Advantech MIC-5332 Bedienungsanleitung PDF herunterladen (Seite 48)

LAN channel selection priority setting list:

0 = The first channel that links up, gets the NC-SI connection to the BMC.

1 = Channel 1 is the preferred port if it is up, otherwise use channel 2 if it is up.

2 = Channel 2 is the preferred port if it is up, otherwise use channel 1 if it is up.

3 = Channel 1 is the only allowed port, always use it, never change to channel 2.

4 = Channel 2 is the only allowed port, always use it, never change to channel 1.

The NC-SI LAN controller channel setting will be stored permanently (non-volatile

EEPROM). The default value is 0.

Read LAN channel selection priority:

Response:

Change LAN channel selection priority:

Response:

4.2.2 System Event Log (SEL)

The IPMC supports a non volatile System Event Log (SEL), which stores events of

onboard sensors as well as hosted FRUs such as the RTM modules. The SEL

contains 8192 bytes (512 sel entries), and new events will overwrite the old ones after

the SEL is full. Besides putting logs in local EEPROM, these events will also be

delivered to Shelf Manager via IPMB-0 interface.

4.3 Board Information

The board information is stored in the FRU EEPROM. User may get the information

via IPMI command: fru.

39 28 00

ipmitool raw 0x2e 0x40 0x39 0x28 0x00 0x04 0x01 <setting>

39 28 00 <setting>

ipmitool raw 0x2e 0x41 0x39 0x28 0x00 0x04 0x01

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 128 129

Keine Kommentare

Advantech MIC-5332 Bedienungsanleitung Seite 48