Advantech MIC-5332 Bedienungsanleitung PDF herunterladen (Seite 100)

6.4.2 Activate HPM FPGA image



Although the new FPGA is successfully downloaded to the board (called “deferred”

version), it needs to be activated before it will be functional. Use following HPM.1

command:

6.4.3 Payload Reset

In order to activate the new FPGA image a payload reset is required.

The payload reset can be performed through different ways.

If the user is working on the OS via KCS a linux “reboot”,”poweroff” or “halt” will

activate the new FPGA image.

If the user accesses the BMC through other interfaces (LAN/IPMB) a

deactivation and activation cycle is needed, in order to update the FPGA.

During the FPGA update the front panel FRU LED’s 1 and 2 (red OOS and green

payload LED) are flashing! This procedure needs around 60 seconds to finalize

the update.



(*) Component requires Payload Cold Reset

[root@localhost ~]# $ ipmitool hpm activate

PICMG HPM.1 Upgrade Agent 1.0.2:

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 128 129

Keine Kommentare

Advantech MIC-5332 Bedienungsanleitung Seite 100