Advantech MIC-5332 Bedienungsanleitung PDF herunterladen (Seite 36)

Note:

 Regarding the slot information, please refer to the backplane/chassis manual

 The MIC-5332 also supports hot-swap, i.e. no need to turn off the chassis power

before installing the board.

To extract the MIC-5332 from the chassis:

1. Unlock the ejector handle at the bottom side, next to the FMM bay.

2. The extraction request will be delivered to the IPMC. The IPMC will perform a

graceful shutdown of the ACPI aware operating system. The blue hot-swap LED

will start blinking once the ejector handle is unlocked.

3. After the x86 subsystem on the blade has been powered down, the blue hot-swap

LED will light up, which indicates the board is ready to be removed.

4. Unfasten the retaining thumbscrews.

5. Unlock the other handle, and fully open both handles (push handles outwards) to

extract the board.

6. Pull the MIC-5332 out of the chassis.

Figure 3.6 Unlock the ejector handle

Caution!

 DO NOT attempt to extract the board when blue LED is off or blinking. This may

cause non-recoverable damage to the board.

3.4.2 FMM (Option)

The MIC-5332 supports one FMM slot for feature expansion, such as VGA output,

additional 10GbE support for dual-dual star FI, and Intel® QuickAssist support (for

details, please refer to table 2.10).It is assumed that MIC-5332 is shipped with the

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 128 129

Keine Kommentare

Advantech MIC-5332 Bedienungsanleitung Seite 36