Advantech MIC-5332 Bedienungsanleitung PDF herunterladen (Seite 37)

FMM installed. Mounting instructions are still provided here to support customer

development as well as inhouse RMA and repair.

For installation of the FMM, please follow the below procedures:

1. Locate the FMM site on the blade (refer to figure 3.9) and make sure the module

and the carrier connectors are aligned. Insert the FMM module until the

connector is firmly seated in the socket.

2. Install the screws (refer to figure 3.10), and power on the MIC-5332 to make sure

the installation is completed.

3. To remove the FMM, follow the procedure in reverse.

Figure 3.7 FMM Module top (left) and bottom (right) views

Installation w/ screws on the

533

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 128 129

Keine Kommentare

Advantech MIC-5332 Bedienungsanleitung Seite 37