Advantech MIC-5332 Bedienungsanleitung PDF herunterladen (Seite 21)

MIC-5332 are listed as table 2.7.

Figure 2.2 DIMM slots on the MIC-5332

DIMM Type RDIMMs UDIMMs LRDIMMs

Size

2GB, 4GB, 8GB, 16GB and

32GB

2GB, 4GB and 8GB

8GB, 16GB and 32GB

Speed 1066 / 1333 / 1600 1066 / 1333

Ranks

SR, DR, QR (only for

1066/1333)

SR, DR

Table 2.7: Supported DIMM Configurations

2. Note:

 2G, 4G and 8GB DDR3 DRAM technologies are supported for these devices:

 UDIMMs x8, x16

 RDIMMs x4, x8

 LRDIMMs x4, x8

 Up to 4 ranks supported per memory channel: 1, 2 or 4 ranks per DIMM.

 Supports a maximum of 256GB DDR3-1600 memory.

2.3.2 RAS Mode

Four DRAM RAS modes are supported by the memory controller which can be

configured in BIOS setup menu.

 Independent Channel Mode (Default)

Channels can be populated in any order in Independent Channel Mode. All four

channels may be populated in any order and have no matching requirements. All

channels must run at the same interface frequency, but individual channels may

run at different DIMM timings (RAS latency, CAS latency, etc.).

 Rank Sparing Mode

In Rank Sparing Mode, one rank is a spare of the other ranks on the same

channel. The spare rank is held in reserve and is not available as system

memory. The spare rank must have identical or larger memory capacity than all

the other ranks (sparing source ranks) on the same channel. After sparing, the

sparing source rank will be lost.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 128 129

Keine Kommentare

Advantech MIC-5332 Bedienungsanleitung Seite 21