Advantech I/O Module 5000 Series Bedienungsanleitung PDF herunterladen (Seite 18)

Programmable Automation Controllers

Features

13-18

Introduction

APAX-5082 is a 8-ch pulse width modulation module and designed to control analog circuit. It uses digital outputs to generate a waveform with variant duty cycle and frequency to

control analog circuits. The PWM frequency is up to 500kHz and the range of duty cycle is from 0.1% to 99.9%. It also has built-in 6-ch DI and DO for easy and convenience usage

without additional digital I/O modules.

APAX-5082

8-ch Pulse Width Modulation Module

Speciﬁcations

General

 Dimension (W x H x D) 30 x 139 x 100 mm

 Weight 165 g

 Power Consumption 2.5 W @ 24 V

(Typical)

 Status Display LED per channel

On: Logic level 1

Off: Logic level 0

Isolated Pulse Width Output

 Channels 8

 Pulse Frequency 0 ~ 30kHz

 Duty Ratio 0.1 ~ 99.9%

 Resolution 16 bits

 Output Voltage Range 8 ~ 35 V

 Normal Output Current 0.5A (per channel)

 Isolation Protection 2,500 V

Isolated Digital Input

 Channel 6

 Type Sink/Source (Wet Contact)

 Input Voltage For "0" Signal: -5 ~ 5 V

For "1" Signal: 15 ~ 30 V

& -15 ~ -30 V

 Maximum Input Current 7.3 mA

 Input Impedance 5.4kΩ

 Input Filter 3 ms

 Isolation Protection 2,500 V

 8-ch pulse width modulation output

 Automatic generation of PWM output by hardware, without software effort

 PWM frequency up to 30kHz with 0.1 ~ 99.9% duty cycle

 Built-in 6-ch DI and DO for convenient usage

Isolated Digital Output

 Channel 6

 Type Sink

 Voltage Range 8 ~ 35 V

 Rated Output Current at 0.5 A (per channel)

Signal "1"

 Permitted Output Current at max. 0.75 A

Signal "1"

 Output Current at Signal "0" 0.1 mA

 Lamp Load max. 5 W

 On-State Voltage Drop 0.15 V at 0.5 A

 Switch Rate

For Resistive Load max. 300 Hz

For Inductive Load max. 20 Hz

For Lamp Load max. 200 Hz

(Using 5W lamp and testing under 24 V)

 Isolation Protection 2,500 V

Environment

 Operating Temperature -10 ~ 60°C

 Storage Temperature -40 ~ 70°C

 Relative Humidity 5 ~ 95% (non-condensing))

Ordering Information

 APAX-5082 8-ch Pulse Width Modulation Module

 APAX-5001 1-slot Backplane Module

 APAX-5002 2-slot Backplane Module

NEW

RoHS

COMPLIANT

2002/95/EC

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

Advantech I/O Module 5000 Series Bedienungsanleitung Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Advantech I/O Module 5000 Series