
Comedi
82 / 148
Manufacturer Device Name
Amplicon PC215E pc215e
Amplicon PCI215 pci215 or amplc_dio200
Amplicon PC218E pc218e
Amplicon PC272E pc272e
Amplicon PCI272 pci272 or amplc_dio200
Configuration options - PC212E, PC214E, PC215E, PC218E, PC272E:
[0] - I/O port base address
[1] - IRQ (optional, but commands won’t work without it)
Configuration options - PCI215, PCI272:
[0] - PCI bus of device (optional)
[1] - PCI slot of device (optional)
If bus/slot is not specified, the first available PCI device will
be used.
Passing a zero for an option is the same as leaving it unspecified.
SUBDEVICES
PC218E PC212E PC215E/PCI215
------------- ------------- -------------
Subdevices 7 6 5
0 CTR-X1 PPI-X PPI-X
1 CTR-X2 CTR-Y1 PPI-Y
2 CTR-Y1 CTR-Y2 CTR-Z1
3 CTR-Y2 CTR-Z1 CTR-Z2
4 CTR-Z1 CTR-Z2 INTERRUPT
5 CTR-Z2 INTERRUPT
6 INTERRUPT
PC214E PC272E/PCI272
------------- -------------
Subdevices 4 4
0 PPI-X PPI-X
1 PPI-Y PPI-Y
2 CTR-Z1
*
PPI-Z
3 INTERRUPT
*
INTERRUPT
Each PPI is a 8255 chip providing 24 DIO channels. The DIO channels
are configurable as inputs or outputs in four groups:
Port A - channels 0 to 7
Port B - channels 8 to 15
Port CL - channels 16 to 19
Port CH - channels 20 to 23
Only mode 0 of the 8255 chips is supported.
Each CTR is a 8254 chip providing 3 16-bit counter channels. Each
channel is configured individually with INSN_CONFIG instructions. The
specific type of configuration instruction is specified in data[0].
Some configuration instructions expect an additional parameter in
data[1]; others return a value in data[1]. The following configuration
instructions are supported:
INSN_CONFIG_SET_COUNTER_MODE. Sets the counter channel’s mode and
BCD/binary setting specified in data[1].
Kommentare zu diesen Handbüchern