Advantech RSB-4410 Bedienungsanleitung PDF herunterladen (Seite 33)

25 RSB-4410 User Manual

Chapter 2 H/W Installation

inet addr:172.17.21.96 Bcast:172.17.21.255

Mask:255.255.254.0

UP BROADCAST RUNNING MULTICAST MTU:1500

Metric:1

RX packets:129 errors:0 dropped:18 overruns:0

frame:0

TX packets:2 errors:0 dropped:0 overruns:0

carrier:0

collisions:0 txqueuelen:1000

RX bytes:15016 (14.6 KiB) TX bytes:656 (656.0 B)

lo Link encap:Local Loopback

inet addr:127.0.0.1 Mask:255.0.0.0

UP LOOPBACK RUNNING MTU:16436 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0

frame:0

TX packets:0 errors:0 dropped:0 overruns:0

carrier:0

collisions:0 txqueuelen:0

RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

If you would like to config IP manually, please use below command:

#ifconfig eth0 xxx.xxx.xxx.xxx up

Here is a real case for your reference.The hosts (RSB-4410) IP is 172.17.21.97; the

target(A desktop computer) IP is 172.17.20.192

#ifconfig eth0 172.17.21.97 up

#ifconfig eth0

eth0 Link encap:Ethernet HWaddr 00:04:9F:01:30:E0

inet addr:172.17.21.97 Bcast:172.17.255.255

Mask:255.255.0.0

UP BROADCAST RUNNING MULTICAST MTU:1500

Metric:1

RX packets:2851 errors:0 dropped:271 overruns:0

frame:0

TX packets:30 errors:0 dropped:0 overruns:0

carrier:0

collisions:0 txqueuelen:1000

RX bytes:291407 (284.5 KiB) TX bytes:2000 (1.9

KiB)

The target computer (Client) IP address is 172.17.20.192, so we can use the below

command to see if we can get any response from the client

#ping 172.17.20.192

PING 172.17.20.192 (172.17.20.192): 56 data bytes

64 bytes from 172.17.20.192: seq=0 ttl=128 time=7.417 ms

64 bytes from 172.17.20.192: seq=1 ttl=128 time=0.203 ms

64 bytes from 172.17.20.192: seq=2 ttl=128 time=0.300 ms

--- 172.17.20.192 ping statistics ---

3 packets transmitted, 3 packets received, 0% packet loss

round-trip min/avg/max = 0.203/2.640/7.417 ms

2.5.9 RS232 Test

As you can see below, there are 3 UART supported by RSB-4410. /dev/ttymxc0 is

reserved for RSB-4410 debug port (RSB-4410 CN1), the rest UART ports could be

applied by the user.

#setserial -g /dev/ttymxc*

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 65 66

Kommentare zu diesen Handbüchern

Keine Kommentare

Advantech RSB-4410 Bedienungsanleitung Seite 33

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Prozessoren Advantech RSB-4410