Advantech RSB-4410 Bedienungsanleitung PDF herunterladen (Seite 28)

RSB-4410 User Manual 20

Figure 2.24 Board Dimension Layout (Coastline)

2.4 Quick Start of RSB-4410

2.4.1 Debug Port Connection

1. Connect debug port cable to the RSB-4410 debug port.

2. Connect the RS-232 extension cable to the debug cable.

3. Connector the other side of the extension cable to the USB-to-RS-232 cable

then connect to your PC.

2.4.2 Debug Port setting

RSB-4410 can communicate with a host server (Windows or Linux) by using serial

cables. Common serial communication programs such as Hyper Terminal, Tera Term

or PuTTY can be used in this case. The example below describes the serial terminal

setup using Hyper Terminal on a Windows host:

1. Connect RSB-4410 with your Windows PC by using a serial cable.

2. Open Hyper Terminal on your Windows PC, and select the settings as shown in

Figure 3.6.

3. After the bootloader is programmed on SD card, insert power adapter connector

to DC jack on RSB-4410 to power up the board. The bootloader prompt is dis-

played on the terminal screen.

Figure 2.25 Hyper Terminal Settings for Terminal Setup

5.5

16.55

36.9

70.95

94.87

107.22

124.25

141.85

146

11.62

8.62

12.17

14.97

15.92

7.8

13.92

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 65 66

Keine Kommentare

Advantech RSB-4410 Bedienungsanleitung Seite 28