Advantech Data Acquisition Modules ADAM 4000 Bedienungsanleitung PDF herunterladen (Seite 276)

100

101

Chapter 7

ADAM 4000 Series User’s Manual

$AAAG

Name Set Gate Mode command

Description Request the specified counter/frequency module to set its

gate to one of the three states, high, low or disabled.

Syntax $AAAG(cr)

$ is a delimiter character.

AA (range 00-FF) represents the 2-character hexadecimal

address that you will access to.

A is the Gate Mode command.

G determines the gate mode:

G = 0 the gate is low

G = 1 the gate is high

G = 2 the gate is disabled

(cr) is the terminating character, carriage return (0Dh).

Response !AA(cr) if the command is valid.

There is no response if the module detects a syntax or

communication error, or even if the specified address does

not exist.

! is a delimiter character which indicates a valid command.

AA (range 00-FF) represents the 2-character hexadecimal

address of the module.

(cr) is the terminating character, carriage return (0Dh).

Example command: $01A1(cr)

response: !01(cr)

The command requests the counter/frequency module at

address 01 to set its gate high. The module will reply with

an address indicating that it has executed the command.

4080, 4080D

1 2 ... 271 272 273 274 275 276 277 278 279 280 281 ... 428 429

Kommentare zu diesen Handbüchern

Keine Kommentare

Advantech Data Acquisition Modules ADAM 4000 Bedienungsanleitung Seite 276

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Advantech Data Acquisition Modules ADAM 4000