Advantech Data Acquisition Modules ADAM 4000 Bedienungsanleitung PDF herunterladen (Seite 217)

100

101

Chapter 6

ADAM 4000 Series User’s Manual

%AANNTTCCFF

Name Configuration command

Description Sets address, input range, baud rate, data format, checksum

status, and/or integration time for an analog output module.

Syntax %AANNTTCCFF(cr)

% is a delimiter character.

AA (range 00-FF) represents the 2-character hexadecimal

address that is to be configured.

represents the new hexadecimal address of the analog

output module. Range is from 00h to FFh.

TT represents the type codes (output range codes).

(See

Table 6-2 on next page)

CC represents the baud rate codes.

(See

Table 6-1 on next page)

FF is a hexadecimal number that equals to 8-bit parameter

representing the status of data format, slew rate, and

checksum. The layout of the 8-bit parameter is shown in

Figure 6-1. Bit 7 is not used and must be set to 0.

(cr) is the terminating character, carriage return (0Dh).

Figure 6-1 Data format for FF (8-bit parameter)

Note: Only ADAM-4021 supports “% of FSR” and “two’s complement of

hexadecimal” Data Format.

4021

1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 428 429

Kommentare zu diesen Handbüchern

Keine Kommentare

Advantech Data Acquisition Modules ADAM 4000 Bedienungsanleitung Seite 217

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Advantech Data Acquisition Modules ADAM 4000