Advantech 5000 Series Bedienungsanleitung PDF herunterladen (Seite 25)

100

101

Installation Guideline

INIT* is used for changing baud rate and checksum. COM is provided

as reference to the RS-485 ground signal. DATA+ and DATA- are

provided for the RS-485 twisted pair connection.

Figure 2-7 ADAM-5000 Wiring Connections

I/O Module Wiring

The system uses plug-in screw terminal blocks for the interface

between I/O module and field devices. The following information

must be considered when connecting electrical devices to I/O modules.

1. The terminal block accepts 0.5 mm

to 2.5 mm

wires

2. Always use a continuous length of wire, do not combine wires to

attain needed length

3. Use the shortest possible wire length

4. Use the wire trays for routing where possible

2-10 ADAM-5000

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 300 301

Kommentare zu diesen Handbüchern

Keine Kommentare

Advantech 5000 Series Bedienungsanleitung Seite 25

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Advantech 5000 Series