Advantech 5000 Series Bedienungsanleitung PDF herunterladen (Seite 100)

Chapter 6

$aaSi1

Name RTD Zero Calibration

Description Calibrates a specified RTD input module of a specified

system to correct for offset errors.

Syntax $aaSi1(cr)

$ is a delimiter character.

aa (range 00-FF) represents the 2-character hexadecimal

address of the ADAM-5000 system which contains the

module which is to be calibrated.

Si identifies the slot i (i:0 to 3) containing the RTD

module to be calibrated.

1 represents the zero calibration command.

(cr) is the terminating character, carriage return (0Dh).

Response. !aa(cr) if the command is valid.

?aa(cr) if an invalid operation was entered.

There is no response if the module detects a syntax error

or communication error or if the specified address does

not exist.

! delimiter character indicating a valid command was

received.

? delimiter character indicating the command was

invalid.

aa (range 00-FF) represents the 2-character hexadecimal

address of an ADAM-5000 system.

(cr) is the terminating character, carriage return (0Dh).

ADAM-5000 6-35

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 300 301

Keine Kommentare

Advantech 5000 Series Bedienungsanleitung Seite 100