Advantech IPC-623 Series Bedienungsanleitung PDF herunterladen (Seite 22)

IPC-623 User Manual 16

2.6 Installing Disk Drives

The disk drive bay in the front right section can hold three 5.25” disk

drives (such as CD-ROM drive, CD-R/W drive, DVD-ROM drive, or

mobile disk drives, etc.), an external 3.5” FDD and an internal 3.5” HDD.

To install the HDD or FDD, please proceed as follows:

1. Remove the top front cover.

2. Unscrew the four screws on the disk drive housing and then take it out.

3. Insert the disk drive into the proper location in the disk drive housing,

and then fix it with the screws provided.

4. Connect a 40-pin flat cable to a CD-ROM drive (or CD-RW drive or

DVD-ROM drive or IDE HDD), or a SCSI cable to a SCSI HDD, or a

SATA cable to a SATA HDD, or a 34-pin flat cable to a FDD. Then

plug the 4-pin power connector into each disk drive. Please refer to

Figure 2.9 and Figure 2.10.

5. Put back the disk drive housing to the correct location and fasten it with

the four screws.

6. Secure the front top cover with four screws.

Figure 2.9: Removing the disk drive housing

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 45 46

Keine Kommentare

Advantech IPC-623 Series Bedienungsanleitung Seite 22