Advantech AIMB-766 Bedienungsanleitung PDF herunterladen (Seite 26)

ACP-1010 User Manual 18

3.4 Replacing the power supply

ACP-1010 supports a single, 1U power supply. To change the power supply, please

proceed as follows:

1. Un-plug the AC inlet from the power supply.

2. Remove the top cover.

3. Unplug the ATX power connector and +12V power connector from the CPU card

/ motherboard, and the peripheral power connector(s) from the drive disk(s).

4. Remove the two screws that mount the power supply bracket to the chassis,

and the two other screws that mount the fan bracket on the chassis, then lift out

the power supply.

5. Place a new power supply into the chassis and fasten it with the four screws.

6. Plug the ATX power connector and +12V power connector to the CPU card, and

the peripheral power connector(s) to the proper drive disks.

7. Return the top cover and plug in the AC inlet.

Figure 3.6 Replacing the power supply for ACP-1010BP

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 41 42

Keine Kommentare

Advantech AIMB-766 Bedienungsanleitung Seite 26