Advantech PPC-L126 Bedienungsanleitung PDF herunterladen (Seite 101)

89 Chapter 9

9.2.11 Set Password

To Establish Password

1. Choose the Set Password option from the CMOS Setup Utility

main menu and press <Enter>.

2. When you see “Enter Password,” enter the desired password and

press <Enter>.

3. At the “Confirm Password” prompt, retype the desired password,

then press <Enter>.

4. Select Save to CMOS and EXIT, type <Y>, then <Enter>.

To Change Password

1. Choose the Set Password option from the CMOS Setup Utility

main menu and press <Enter>.

2. When you see “Enter Password,” enter the existing password and

press <Enter>.

3. You will see “Confirm Password.” Type it again, and press

<Enter>.

4. Select Set Password again, and at the “Enter Password” prompt,

enter the new password and press <Enter>.

5. At the “Confirm Password” prompt, retype the new password, and

press <Enter>.

6. Select Save to CMOS and EXIT, type <Y>, then <Enter>.

Note To enable this feature, you should first go to the

Advanced BIOS Features menu, choose the

Security Option, and select either Setup or Sys-

tem, depending on which aspect you want pass-

word protected. Setup requires a password only

to enter Setup. System requires the password

either to enter Setup or to boot the system.

A password may be at most 8 characters long.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 113 114

Keine Kommentare

Advantech PPC-L126 Bedienungsanleitung Seite 101