
10-12
Features
Industrial Communication
All product specifications are subject to change without notice Last updated : January 2005
Specifications
Bus Interface PCI bus spec. 2.2 compliant
All ports use the same IRQ assigned by PCI Plug & Play
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, even, odd
Communication 16PCI954
Controller
Speed 50 bps ~ 921.6 kbps
Data Signals TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND, RI
Surge Protection 2500 V
DC
ESD Protection 16 kV
Power Consumption 5 V @ 400 mA (Max.)
Dimensions Low profile PCI MD1
(119.91 x 64.41 mm (4.7” x 2.5”))
Operating Temperature 0 ~ 65° C (refer to IEC 68-2-1,2) (32 ~ 149° F)
Operating Humidity 5 ~ 95% Relative Humidity, non-condensing (refer to
IEC 68-2-3)
Storage Temperature -25 ~ 85° C (-13 ~ 185°F)
PCI-1610UP
4-Port RS-232 Low-Profile Universal PCI
Communication Card, w/Surge Protection
PCI bus specification 2.2 compliant
Speeds up to 921.6 kbps
Four independent RS-232 serial ports
I/O address automatically assigned by PCI Plug & Play
OS supported: Windows
®
98/ME/2000/XP, Linux
®
2500 V
DC
Surge protection
Interrupt status register for increased performance
Powerful and easy-to-use utility (ICOM Tools)
Universal PCI
Low Profile PCI
Introduction
The PCI-1610UP is a 4-port RS-232 PCI communication card, that is compatible with the PCI 2.2 bus specification for universal connectivity and low profile PCI cards. PCI-1610UP
provides four independent RS-232 ports. To improve the performance of the system, the PCI-1610UP provides transmission rates up to 921.6 kbps. To increase reliability, The PCI-
1610UP offers surge protection technology, protecting your system from abrupt high voltage up to 2500 V
DC
. The PCI-1610UP also comes with high-performance 16PCI954 UARTs
with 128-byte FIFO to reduce CPU load. These components allow more stability and reliability. Therefore, PCI-1610UP is especially suitable for multitasking environments.
PCI-1610UP follows the Low Profile PCI MD1 standard. It has the same protocol and electronic definition as standard PCI, but the Low profile PCI card is smaller. Thus, PCI-1610UP
is suitable for embedded systems, or any size-constrained environment. Moreover, PCI-1610UP has an universal PCI connector, which allows support in traditional systems with
5 V signaling or newer systems with 3.3 V signaling.
Advantech also provides a convenient utility program called ICOM Tools, to help you test the PCI card's performance by analyzing the port status. The menu commands and toolbar
buttons are easy to use. ICOM Tools acts as a PC-based data scope that lets you set a trigger condition, capture the communication data and monitor the signal status. ICOM Tools
can be used with all series of Advantech ICOM cards.
Ordering Information
PCI-1610UP 4-Port RS-232 Low-Profile Universal PCI COMM Card,
w/surge protection
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Kommentare zu diesen Handbüchern