Advantech EKI-6538 Bedienungsanleitung PDF herunterladen (Seite 43)

35 Chapter 3

Port-based VLAN

If you set the VLAN mode to Port-based VLAN, each physical switch

port is configured with an access list specifying membership in a set of

VLANs.

You could find the status in the Port-based VLAN configuration page

show “Enable”. The default VLAN ID for each port is “1”.

Figure 3.19: Default Port-based VLAN Setting Screen

To configure the port-based VLAN, you have to choose the VLAN ID

from the pull down menu first. Second, choose the port member for this

VLAN ID via click the icon under the port number. Finally, don’t forget

to click Apply to finish your setting for this VLAN ID.

Fig 3.20 shows port 2 and port 3 belongs to the same VLAN group —

VID= 2.

Warning : The default VID=1 should be removed or

changed first while you want to configure port-

based VLAN by your option. If you didn't

remove or change it, default VID=1 would allow

packets transmitted and received between all

ports, and your optional configuration would be

ineffective.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 51 52

Keine Kommentare

Advantech EKI-6538 Bedienungsanleitung Seite 43