Advantech ADAM-4571 Bedienungsanleitung PDF herunterladen (Seite 31)

23 Chapter 2

2.3 Installation

2.3.1 Configuration Utility

In order to use a PC and an Ethernet network to control serial devices

connected to the EDG series, you must first have a host running Windows

NT/2000/XP. This type of application also requires the host to have an

Ethernet card and TCP/IP protocol installed. The following are the

required steps for EDG series:

1. Insert the Advantech industrial communication CD-ROM into the

drive (e.g. D:\) on the host PC. Change the host computer's default

drive from C: to D:

2. Use your Windows Explorer or the Windows Run command to execute

the Setup program (the path for the Setup program on the CD-ROM

should be on the CD-ROM should be:

D:\Device Server(EDG)\Utility&Driver\EDG COMPort Configuration

Utility\V1.xx\98_NT_2000_XP v1.60 b139

3. Upon executing the setup program, the Welcome Dialog Box will pop-

up. Press the "Next" button to continue.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 63 64

Keine Kommentare

Advantech ADAM-4571 Bedienungsanleitung Seite 31