Advantech ADAM-4577 Bedienungsanleitung PDF herunterladen (Seite 26)

16 ADAM-4577 User’s Manual

2.2.3 Power Connection

You should take the following steps to connect ADAM-4577 power.

1.Connect the power cable to 2-pin connector

2.Connect power cable to power adapter

If the ADAM-4577 is working properly, the green power LED will light

2.2.2 Network Connection

There are two ways to use the 10 Base-T Ethernet connector located

on the ADAM-4577 :

1.For Local Area Network (LAN) applications using the

ADAM-4577, you will simply plug one end of your Ethernetcable into

the 10 Base-T connector, and the other end into the hub connected to

your network.

2.When installing and configuring, you will find it convenient to hook

the ADAM-4577 directly to your computer’s Ethernet card. To do this

you will need to use a “crossed-cable”, such as the one supplied with

your server.

Cabling requirements for the Ethernet side

Use an RJ-45 connector to connect the Ethernet port of the ADAM-

4577 to the network hub. The cable for connection should be Category

3 (for 10Mbps data rate) UTP/STP cable, which is compliant with EIA/

TIA 586 specifications. Maximum length between the hub and any

ADAM-4577 is up to 100 meters (ca. 300 ft).

ADAM

Ethernet

RS-232/422/48 5

+VsGNDPort2 Port1

Dual Speed Hub

Category 3

EIA/TIA 568

UTP Cable

100m

ADAM-4577

ADAM-5510

Figure 2-10 Connecting ADAM-4577 series to the hub

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 75 76

Keine Kommentare

Advantech ADAM-4577 Bedienungsanleitung Seite 26