Advantech Celeron M Universal Network Controller with PC/104 Extension UNO-2170 Bedienungsanleitung PDF herunterladen (Seite 22)

UNO-2170 User Manual 16

Chapter 3 Initial Setup

3.1 Inserting a CompactFlash Card

1. Remove the power cord.

2. Unscrew the four screws from the rear panel of the UNO-2170.

3. Remove the rear panel.

4. Plug a CompactFlash card with your OS and application program

into a CompactFlash card slot on board.

5. Screw back the rear panel with four screws.

3.2 Chassis Grounding

UNO-2170 provides good EMI protection and a stable grounding base.

There is an easy-to-connect chassis grounding point for you to use.

Figure 3.1: Chassis Grounding Connection

You can select if you wish to combine the chassis grounding point with

the system grounding by using an onboard jumper selection. (JP7)

Note: The CompactFlash is allocated as “Secondary IDE Master”.

Open - Separates system power ground and chassis

ground. (default)

Closed - Connects system power ground and chassis

ground.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Keine Kommentare

Advantech Celeron M Universal Network Controller with PC/104 Extension UNO-2170 Bedienungsanleitung Seite 22