
Features
Plug-in I/O Cards
10-18
Specifications
Analog Input
Channels 16 single-ended/ 8 differential (SW programmable)
Resolution 12 bits
Max. Sampling Rate* Multi-channel, single gain: 1 MS/s
Multi-channel, multi gain: 600 kS/s
Multi-channel, multi gain, unipolar/bipolar: 400 kS/s
FIFO Size 1024 samples
Overvoltage Protection 30 Vp-p
Input Impedance 100 MΩ 10 pF (Off), 100 MΩ 100 pF (On)
Sampling Modes Software, onboard Programmable Pacer or External
Input Range (V, software programmable)
Unipolar
N/A 0 ~ 10 0 ~ 5 0 ~ 2.5 0 ~ 1.25
Bipolar
±10 ±5 ±2.5 ±1.25 ±0.625
Accuracy (% of FSR ±1LSB)
0.05 0.03 0.03 0.05 0.1
*Note:
The sampling rate and throughput depends on the computer hardware architecture and
software environment. The rates may vary due to programming language, code efficiency,
CPU utilization and so on.
Analog Output
Channels 2
Resolution 12 bits
Output Rate
1 MS/s
FIFO Size 32768 samples
Output Range (V, software programmable)
Internal Reference
Bipolar
±5, ±10
Unipolar
0 ~ 5, 0 ~ 10
External Reference
0 ~ +x V @ +x V (-10 ≤ x ≤ 10)
-x ~ +x V @ +x V (-10 ≤ x ≤ 10)
Slew Rate 20 V/µs
Driving Capability ±10 mA
Output Impedance 0.1 Ωmax.
Operation Mode Software polling, continuous output, waveform output
Accuracy INLE: ±1 LSB
DNLE: ±1 LSB (monotonic)
Digital Input
Channels 16
Compatibility 5 V/TTL
Input Voltage Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Digital Output
Channels 16
Compatibility 5 V/TTL
Output Voltage Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Output Capability
Sink: 8.0 mA @ 0.8 V
Source: -0.4 mA @ 2.0 V
Pacer/Counter
Channels 3
Resolution 16 bits
Compatibility 5 V/TTL
Max. Input Frequency 10 MHz
Reference Clock Internal: 10 MHz, 1 MHz, 100 kHz, 10 kHz
External Frequency: 10 MHz max.
General
Bus Type PCI V 2.2
I/O Connector
SCSI-68P female x 1
Dimensions (L x H)
175 x 100 mm (6.9" x 3.9")
Power Consumption
Typical: +5 V @ 850 mA, +12 V @ 600 mA
Max: +5 V @ 1.0 A, +12 V @ 700 mA
Operating Temperature
0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
Storing Temperature
-20 ~ 85° C (-4 ~ 185° F)
Storing Humidity
5 ~ 95% RH non-condensing (refer to IEC 68-2-3)
PCI-1712
PCI-1712L
Introduction
PCI-1712 and PCI-1712L are powerful high-speed multifunction cards for the PCI bus. They feature a 1 MHz 12-bit A/D converter, an onboard FIFO buffer (storing up to 1024 samples
for A/D, and up to 32 K samples for D/A conversion). The PCI-1712 cards provide a total of up to 16 single-ended or 8 differential A/D input channels or a mixed combination, two
12-bit D/A output channels, 16 digital input/output channels, and three 10 MHz 16-bit multifunction counter channels. PCI-1712L is a low-cost version without analog output.
16 single-ended, 8 differential or a combination of analog inputs
12-bit A/D converter, with up to 1 MHz sampling rate
Programmable gain
Automatic channel/gain/SD*/BU* scanning
Onboard FIFO memory (AI:1024 samples AO:32768 samples)
Two 12-bit analog output channels with continuous waveform output function
16 digital input and output channels
Three 16-bit programmable multifunction counter/timers on 10 MHz
Auto-calibration (AI/AO)
PCI-Bus mastering data transfer
Pre-, post-, about- and delay-trigger data acquisition modes for analog input
channels
Onboard programmable multifunction counter/timer
Continuous analog output (PCI-1712 only)
Flexible triggering and clocking capabilities
1 MS/s, 12-bit High-speed
Multifunction Card
1 MS/s, 12-bit High-speed
Multifunction Card w/o AO function
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Kommentare zu diesen Handbüchern