Advantech EDG-4508R+ Bedienungsanleitung PDF herunterladen (Seite 53)

47 Chapter 3

Command Listen Port

Each port has its own command listen port to accept connected request of

other network device. So, the command listen port can’t be set the same

value. You can use ‘AT command’ to change the port setting via the com-

mand listen port.

Data Idle Timeout

The default is 60 seconds. If you want to keep connection continually,

you can key-in “0”.

The following commands are available for EDG-4516(R)+ and EDG-

4508(R)+.

Command Function

ATDT<IP

address>

<CR>

“Forms a TCP connection to the specified host.

Ex: ATDT 192.0.55.22:5201

In above example, the EDG-4516(R)+ and EDG-

4508(R)+ forms a raw TCP connection to the net-

working device (192.0.55.22). The TCP port is 5201.”

ATA <CR> Answering an incoming call

+++<CR> Returns the user to the command prompt when

entered from the serial port during a remote host

connection.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 107 108

Keine Kommentare

Advantech EDG-4508R+ Bedienungsanleitung Seite 53