Advantech PCIE-1756 Bedienungsanleitung PDF herunterladen (Seite 29)

21 Chapter 3

3.2.1 Board ID (SW1)

The PCIE-1756 have a built-in DIP switch (SW1), which is used to define

each card’s board ID. When there are multiple cards on the same chassis,

this board ID switch is useful for identifying each card’s device number.

After setting for each PCIE-1756, you can identify each card in system

with different device numbers. The default value of board ID is 0 and if

you need to adjust it to other value, please set the SW1 by referring to

Table 3.1.

Default Setting is 0

Table 3.1: Board ID Setting (SW1)

BoardID (dec) Switch Position

* = default 1 (ID3) 2 (ID2) 3 (ID1) 4 (ID0)

0ONONONON

1ONONONOFF

2ONONOFFON

3ONONOFFOFF

4 ON OFF ON ON

5ONOFFONOFF

6ONOFFOFFON

7 ON OFF OFF OFF

8 OFF ON ON ON

9 OFF ON ON OFF

10 OFF ON OFF ON

11 OFF ON OFF OFF

12 OFF OFF ON ON

13 OFF OFF ON OFF

14 OFF OFF OFF ON

15 OFF OFF OFF OFF

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 45 46

Keine Kommentare

Advantech PCIE-1756 Bedienungsanleitung Seite 29