Advantech GMB-910 Bedienungsanleitung PDF herunterladen (Seite 49)

41 GMB-910 User Manual

Chapter 2 BIOS Operation

To Establish Password

1. Choose the Set Password option from the CMOS Setup Utility main menu and

press <Enter>.

2. When you see “Enter Password”, enter the desired password and press

<Enter>.

3. At the “Confirm Password” prompt, retype the desired password, then press

<Enter>.

4. Select Save to CMOS and EXIT, type <Y>, then <Enter>.

To Change Password

1. Choose the Set Password option from the CMOS Setup Utility main menu and

press <Enter>.

2. When you see “Enter Password”, enter the existing password and press

<Enter>.

3. You will see “Confirm Password”. Type it again, and press <Enter>.

4. Select Set Password again, and at the “Enter Password” prompt, enter the new

password and press <Enter>.

5. At the “Confirm Password” prompt, retype the new password, and press

<Enter>.

6. Select Save to CMOS and EXIT, type <Y>, then <Enter>.

To Disable Password

1. Choose the Set Password option from the CMOS Setup Utility main menu and

press <Enter>.

2. When you see “Enter Password”, enter the existing password and press

<Enter>.

3. You will see “Confirm Password”. Type it again, and press <Enter>.

4. Select Set Password again, and at the “Enter Password” prompt, please don’t

enter anything; just press <Enter>.

5. At the “Confirm Password” prompt, again, don’t type in anything; just press

<Enter>.

6. Select Save to CMOS and EXIT, type <Y>, then <Enter>.

Note! To enable this feature, you should first go to the Advanced BIOS Fea-

tures menu, choose the Security Option, and select either Setup or Sys-

tem, depending on which aspect you want password protected. Setup

requires a password only to enter Setup. System requires the password

either to enter Setup or to boot the system. A password may be at most

8 characters long.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 79 80

Keine Kommentare

Advantech GMB-910 Bedienungsanleitung Seite 49