Advantech AIMB-567 Bedienungsanleitung PDF herunterladen (Seite 52)

AIMB-567 User Manual 40

 High Performance Event Timer

Enabled/Disabled high performance event timer.

 Restore on AC Power Loss

When set to [Power Off], the system goes into an off state after an AC power

loss. When Set to [Power On], the system goes into an on state after an AC

power loss. When set to [Last State], the system goes into either an on or off

state - whatever the system state was before the AC power loss. Configuration

options:[Power Off][Power On][Last State].

3.2.11 Advanced PCI/PnP Setting

Select the PCI/PnP tab from the AIMB-567 setup screen to enter the Plug and Play

BIOS Setup screen. You can display a Plug and Play BIOS Setup option by highlight-

ing it using the <Arrow> keys. All Plug and Play BIOS setup options are described in

this section. The Plug and Play BIOS setup screen is shown below.

 Clear NVRAM

Set this value to force the BIOS to clear the Non-Volatile Random Access Mem-

ory (NVRAM).The Optimal and Fail-Safe default setting is No.

 Plug & Play O/S

When set to No, BIOS configures all the devices in the system. When set to Yes

and if you install a Plug and Play operating system, the OS configures all Plug

and Play devices not required for bootup.

 PCI Latency Timer

Value in units of PCI clocks for PCI device latency timer register.

 PCI IDE BusMaster

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 91 92

Keine Kommentare

Advantech AIMB-567 Bedienungsanleitung Seite 52